RE: Anyone providing T1 Service via Muxed DS3's in Verizon area

OK, when ordering the Muxed DS3 from Verizon, what configuration is typically used to work with the Cisco PA-MC-T3. It seems they configured mine for AMI ESF.
 
Should it have been one of the other 7 options like AMI SF, B8ZS ES, B8ZS SF, C bit Parity, D4 AMI, Non ANSI ESF or Non ANSI ESF B8ZS ?
 
Here is where I am at. I can do a loop back to the DS3 hand off error free and they say the can do a loop back to that same handoff error free. I see the two T1's I have conigured in the field go up, but I never see the T3 go up. They say that they see no framing from me and I get a receive alarm saying loss of receiver.
 
Any ideas?

________________________________

From: owner-verizonisp@westnet.com on behalf of Mark E. Mallett
Sent: Wed 3/21/2007 4:23 PM
To: verizonisp@westnet.com
Subject: Re: Anyone providing T1 Service via Muxed DS3's in Verizon area

On Wed, Mar 21, 2007 at 03:00:10PM -0400, Raymond Bonkowski wrote:
> We are in the process of setting up a muxed DS3 to provide T1 service to some of our customers. We are having very little luck working with our local people to get this working with our CIsco 7200 and PA-MC-T3.
>
> Has anyone else had any experience getting this to work. Maybe willing to share some sample configs.

Yes, but using M13 mux

mm

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Thu Mar 22 13:26:01 2007