Can anyone make sense of this?
(zyxel as the cpe, bridging)
aggrouter#sh run int a11/0/0.80054
Building configuration...
Current configuration : 311 bytes
!
interface ATM11/0/0.80054 point-to-point
ip address aa.bb.cc.209 255.255.255.240
ip verify unicast source reachable-via rx
ip nat outside
ip virtual-reassembly
class-int vzdsl
atm route-bridged ip
pvc 8/54
encapsulation aal5snap
!
end
!
aggrouter#sh conf | b class.*vzdsl
vc-class atm vzdsl
no ilmi manage
oam-pvc manage
encapsulation aal5autoppp Virtual-Template1
!
aggrouter#ping aa.bb.cc.210 size 64
Type escape sequence to abort.
Sending 5, 64-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 8/29/88 ms
aggrouter#ping aa.bb.cc.210 size 65
Type escape sequence to abort.
Sending 5, 65-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
aggrouter#ping aa.bb.cc.210 size 64
Type escape sequence to abort.
Sending 5, 64-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 4/7/8 ms
aggrouter#ping aa.bb.cc.210 size 63
Type escape sequence to abort.
Sending 5, 63-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/8/8 ms
aggrouter#ping aa.bb.cc.210 size 62
Type escape sequence to abort.
Sending 5, 62-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/8/8 ms
aggrouter#ping aa.bb.cc.210 size 80
Type escape sequence to abort.
Sending 5, 80-byte ICMP Echos to aa.bb.cc.210, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Fri Oct 14 00:15:07 2005
This archive was generated by hypermail 2.1.8 : Wed Feb 15 2006 - 09:14:14 EST