Re: Direct PVC CPE Config

What CPE did you use?

You couldn't do PPPoE and assign a subnet/static address?

Eric Kagan wrote:
> Just for the archives, we had to use RFC 1483 Routed (instead of RFC 1483
> Bridged mode) on the Customer router. This is what I was trying to ask
> several times. Sorry for now being clear, but I worded it the best I could.
> It took Verizon about a day to get our first DPVC up and running which
> included a site dispatch, multiple phone calls and emails. It still seems
> no one in the East @ Verizon understands the DPVC setup very well yet.
>
> Eric
>
> ----- Original Message -----
> From: "Christopher X. Candreva" <chris@westnet.com>
> To: <verizonisp@westnet.com>
> Sent: Wednesday, April 09, 2003 5:12 PM
> Subject: RE: Direct PVC CPE Config
>
>
>
>>On Wed, 9 Apr 2003, Eric Kagan wrote:
>>
>>
>>>Thanks - What about the CPE configuration (i.e. Great Speed) for
>>>encapsulation ?
>>
>>Same thing as any other CPE.
>>
>>
>>==========================================================
>>Chris Candreva -- chris@westnet.com -- (914) 967-7816
>>WestNet Internet Services of Westchester
>>http://www.westnet.com/
>>
>>Recent archives of the list can be found at
>>http://www.westnet.com/verizonisp/
>>Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
>>
>
>
>
> Recent archives of the list can be found at
> http://www.westnet.com/verizonisp/
> Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Wed Apr 30 07:44:24 2003