Re: Direct PVC CPE Config

Just for the archives, we had to use RFC 1483 Routed (instead of RFC 1483
Bridged mode) on the Customer router. This is what I was trying to ask
several times. Sorry for now being clear, but I worded it the best I could.
It took Verizon about a day to get our first DPVC up and running which
included a site dispatch, multiple phone calls and emails. It still seems
no one in the East @ Verizon understands the DPVC setup very well yet.

Eric

----- Original Message -----
From: "Christopher X. Candreva" <chris@westnet.com>
To: <verizonisp@westnet.com>
Sent: Wednesday, April 09, 2003 5:12 PM
Subject: RE: Direct PVC CPE Config

> On Wed, 9 Apr 2003, Eric Kagan wrote:
>
> > Thanks - What about the CPE configuration (i.e. Great Speed) for
> > encapsulation ?
>
> Same thing as any other CPE.
>
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> Recent archives of the list can be found at
> http://www.westnet.com/verizonisp/
> Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
>

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Wed Apr 30 06:21:20 2003