WATPA: REMINDER -- Working Meeting -- Tuesday, June 28, 2005, 7:00 PM

From: Norm Jacknis <norm@jacknis.com>
Date: Mon Jun 27 2005 - 19:13:29 EDT

Our monthly working meeting will be Tuesday, June 28 at 7:00 PM in the
Board Room of the Westchester Library System at Ardsley Technology Park.

Please note that we will not be meeting during the summer months.

The address is 410 Saw Mill River Road, Ardsley, New York. (The
complete directions are at the end of this message.) Please note that
the 410 sign seems to direct you to the back of the building, so if you
are going south bound, the real entrance is the left just after the
driveway with 410 on it.

See you there,
Norm

=======================

1) Coming from the north, going southbound on the Saw Mill River
Parkway, get off at the Lawrence Street exit (#16). The exit is off to
the left, near the median. Turn left and go a short distance to the end
of the
street. At that point turn right onto 9A South, also known as Saw Mill
River Road.

After a few hundred yards, you will see various signs for Ardsley Park
(on the left). Go to the last driveway in the campus for 410 Ardsley
Park. You will see the building near the sign, which has a canopy in
front. Turn
left, just past the building, to find the parking area.

2) Coming from the south, going northbound on the Saw Mill River
Parkway, get off at the Lawrence Street exit (#16). Turn right, at the
stop light, and go a short distance to the end of the street. At that
point turn right
onto 9A South, also known as Saw Mill River Road.

After a few hundred yards, you will see various signs for Ardsley Park
(on the left). Go to the last driveway in the campus, marked 410
Ardsley Park. You will see a building which has a canopy in front.
Turn left, just past the building, to find the parking area.

3) Coming from the Cross Westchester Expressway (I-287), bear left onto
the New York State Thruway (I-87), going southbound to New York City.
In a quarter of a mile, you will see the exit for the Saw Mill River
Parkway (going southbound). Get off at the Lawrence Street exit (#16)
of the Saw Mill River Parkway. The exit is off to the left, near the
median. Turn left and go a short distance to the end of the street. At
that point turn right onto 9A South, also known as Saw Mill River Road.

After a few hundred yards, you will see various signs for Ardsley Park
(on the left). Go to the last driveway into the campus, after the one
marked 410 Ardsley Park. You will see the building, which has a canopy
in front.

Turn left, just past the building, to find the parking area.
Received on Mon Jun 27 19:15:08 2005

This archive was generated by hypermail 2.1.8 : Tue Jul 05 2005 - 20:55:02 EDT