WATPA: REMINDER -- WATPA Meeting Tomorrow, Tuesday, November 16, 2004, 7:30 PM

From: Norm Jacknis <norm@jacknis.com>
Date: Mon Nov 15 2004 - 20:26:08 EST

Our monthly working meeting will be Tuesday, November 16 at 7:30 PM in the
Board Room of the Westchester Library System at Ardsley Technology Park.
PLEASE NOTE THE MEETING STARTS A HALF HOUR LATER THAN USUAL.

The address is 410 Saw Mill River Road, Ardsley, New York. (The complete
directions are at the end of this message.) Please note that the 410 sign
seems to direct you to the back of the building, so if you are going south
bound, the real entrance is the left just after the driveway with 410 on it.
See you there,
Norm

=======================
1) Coming from the north, going southbound on the Saw Mill River Parkway,
get off at the Lawrence Street exit (#16). The exit is off to the left, near
the median. Turn left and go a short distance to the end of the street. At
that point turn right onto 9A South, also known as Saw Mill River Road.
After a few hundred yards, you will see various signs for Ardsley Park (on
the left). Go to the last driveway in the campus for 410 Ardsley Park. You
will see the building near the sign, which has a canopy in front. Turn left,
just past the building, to find the parking area.

2) Coming from the south, going northbound on the Saw Mill River Parkway,
get off at the Lawrence Street exit (#16). Turn right, at the stop light,
and go a short distance to the end of the street. At that point turn right
onto 9A South, also known as Saw Mill River Road. After a few hundred
yards, you will see various signs for Ardsley Park (on the left). Go to the
last driveway in the campus, marked 410 Ardsley Park. You will see a
building which has a canopy in front. Turn left, just past the building, to
find the parking area.

3) Coming from the Cross Westchester Expressway (I-287), bear left onto the
New York State Thruway (I-87), going southbound to New York City. In a
quarter of a mile, you will see the exit for the Saw Mill River Parkway
(going southbound). Get off at the Lawrence Street exit (#16) of the Saw
Mill River Parkway. The exit is off to the left, near the median. Turn left
and go a short distance to the end of the street. At that point turn right
onto 9A South, also known as Saw Mill River Road. After a few hundred
yards, you will see various signs for Ardsley Park (on the left). Go to the
last driveway into the campus, after the one marked 410 Ardsley Park. You
will see the building, which has a canopy in front. Turn left, just past
the building, to find the parking area.
Received on Mon Nov 15 20:27:57 2004

This archive was generated by hypermail 2.1.8 : Tue Nov 30 2004 - 21:55:03 EST