Windows NT and WestNet
			 Setting up a PPP Connection
		                    on
	         Microsoft Windows NT Workstation 3.5 and 3.51
				    and 
		   Microsoft Windows NT Server 3.5 and 3.51


Introduction:

	Although Windows NT looks just like Windows 3.1 it doesn't act
like it at all.  To connect to the Internet using NT you must use Windows
NT's Remote Access Service ("RAS").  These instructions cover how to
configure RAS to work with WestNet and how to automate the logon
procedure.  NOTE: These instructions are only good for the versions listed
above and are not guarenteed to work on version 4.0 which will be released
this coming fall.  For version 4.0, most likely, you should use the
Windows 95 instructions.  Refer to the version 4.0 documentation.

	1. Install RAS in Windows NT.

	2. Start the Remote Access client software either by using the
program icon which can be found in the "Remote Access Service" program
group.

	3. Create a new RAS Phone Book entry by doing the following:

		a. Choose the Add button to create a new entry in the RAS
Phone Book.

		b. Name the entry WestNet and use the following phone
numbers:	
			Rye US Robotics Modems (914)-967-7356
			Rye Other Modems (914)-967-7802
			Yorktown US Robotics Modems (914)-245-0796
			Yorktown Other Modems (914)-245-0025

		c. Clear the "Authenticate using current user name and
password" check box.  Now choose Advanced.

		d. Choose Network

		e. Select PPP and TCP/IP and disable NetBEUI and IPX by
clearing their check boxes.

		f. Clear the "Request LCP extensions (RFC 1570)" check
box.

		g. Choose TCP/IP Settings and input the following:

			- Server Assigned IP Address 
			- Specify  Name Server Address:
				Primary: 206.24.6.2
				Secondary: 206.24.6.9
			- Use the default gateway on remote network

	4. Open up your %systemroot%/system32/ras/switch.inf file.  Using
notepad will be fine - DO NOT USE A WORD PROCESSOR.

	5. Append the following to %systemroot%/system32/ras/switch:

	[WestNet Login]
		COMMAND=<cr>

		OK=<match>"ogin:"
		LOOP=<ignore>

		COMMAND=<username><cr>

		OK=<match>"assword:"
		LOOP=<ignore>

		OK=<match>="ex:"
		LOOP=<ignore>

	COMMAND="ppp"<cr>
	COMMAND=PPP<cr>

;----------------------------END SCRIPT-----------------------

	6. Back in the RAS Phone Book hit the Security button.

	7. In the After Dialing box select [WestNet Login].

	8. Choose the OK button until you have succesfully added the entry
to your phone book and you're out to the main RAS screen.

	9. Highlight the new entry in your phone book and choose Dial.

	10. Put your user name and password in the appropriate field.
REMEMBER: WESTNET USER NAMES AND PASSWORDS ARE CASE SENSATIVE.

	11. In the domain field type westnet.com


	12. Click OK to begin the login.

-------------------------------------------------------------------------------
	
	You are now connected to the Internet via your PPP account with
WestNet.  Windows NT is a 32 bit operating system so you should use the
"Windows 95" versions of whatever software you choose.  If you have any
questions please feel free to call WestNet during the business day at
(914)-967-7816.