RE: PPPoE on GreatSpeed routers

From: Christopher X. Candreva <chris_at_westnet.com>
Date: Tue Oct 03 2006 - 21:26:21 EDT

On Tue, 3 Oct 2006, Eric Kagan wrote:

> If it's the 250's they definetly work PPPoE. I had a direct Verizon
> connection running with one doing PPPoE with NAT without issue. I did find

It's the 250s, several models - original, duo, and firewall. From what I can
tell they never try to authenticate, or at least nothing shows up in the
radius log at all. On the Cisco the virtual interface comes up for a few
sceonds then goes down again. Over and over.

> with the 250's they sometimes need to be completely factory blown out and
> reconfig. If you hold in the reset for several seconds (sometimes while on

I'll give that a shot next, I've been doing a reconfig from units currently
doing RFC1483.

Thanks, good to know it is a least possible.

==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Tue Oct 3 21:26:22 2006

This archive was generated by hypermail 2.1.8 : Wed Oct 04 2006 - 17:55:01 EDT