RE: Direct PVC CPE Config

Thanks - What about the CPE configuration (i.e. Great Speed) for
encapsulation ?

Eric

> -----Original Message-----
> From: owner-verizonisp@westnet.com
> [mailto:owner-verizonisp@westnet.com]On Behalf Of Christopher X.
> Candreva
> Sent: Wednesday, April 09, 2003 3:58 PM
> To: Verizonisp
> Subject: Re: Direct PVC CPE Config
>
>
> On Wed, 9 Apr 2003, Eric Kagan wrote:
>
> > Anyway, since this will not be bridged through the Redback the
> configuration
> > is going to change. I'm figuring I will just create a new
> subinterface on
> > our ATM DS3 for the PVC's, but I am not sure how to configure
> the CPE. Will
> > it be RFC1483 Routed or another encapsulation. Anyone familiar with the
> > west coast CPE configurations ? I would normally experiment
> but the first
> > router is being shipped and installed by a 3rd party so I would
> rather not
> > have them "Experiment" for us.
>
> Don't know about the West coast, I just configured our direct PVC customer
> the same as all our PVCs, just that is has only one customer on it.
>
> Doesn't sound like that is helpfull to you though.
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> Recent archives of the list can be found at
> http://www.westnet.com/verizonisp/
> Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
>

Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Wed Apr 9 16:01:03 2003