> > We added this and it doesn't work. The destination WAN IP added itself
back
> > in to the routing table again going through the WAN IP - check this
> > out....Maybe this is a bug in the GreatSpeed Firmware ????
>
> Damn, you're right. I know I had solved this, and I thought this was how.
>
>
Per Cisco doc:
http://www.cisco.com/en/US/tech/tk175/tk15/technologies_white_paper09186a008
0093bd0.shtml
"...As mentioned earlier, the subscribers under the same multipoint
interface may not be able to communicate with each other. If
certain users need to communicate, configure those subscribers under
different interfaces (they can still be in the same bridge group)."
It looks like I am screwed. We might need to look in to direct PVC option.
(If it's available yet). If there is another workaround or cheat please let
me know. I am going to check the Cisco newsgroup archives.
Thanks
Eric
Recent archives of the list can be found at
http://www.westnet.com/verizonisp/
Send 'unsubscribe' in the body to verizonisp-request@westnet.com to leave.
Received on Tue Mar 25 22:40:31 2003
This archive was generated by hypermail 2.1.8 : Tue Jan 11 2005 - 13:51:48 EST